Equine Fusion Ultimate Stud Kit
Product Description
The Equine Fusion Ultimate Stud kit comprises of 30 studs and an installation tool which fits into an electric drill.
The studs are easy to instal and designed to give good grip on snow and ice without compromising the properties of the boots.
The stuyds can be installed when needed and removed when not. It is recommended to use the Equine Fusion Dampening Pads inside the boots while using the studs to ensure the most comfortable ride for the horse and longevit of the sole.
Twelve studs per boot are recommended for sizes 7 - 9, thirteen for sizes 10-11, and fifteen per boot for larger sizes.
Stud Installation
Stud Installation
How to install studs in Equine Fusion boots:
1. To begin, you need the boots, a stud kit with tool and a power drill
2. Install tool in the drill
3. Insert one stud into the tool
4. Align the cutting edge of the stud with the centre point of the selected rubber tread
5. Press stud firmly into the boot while using the drill to rotate (start slowly) the stud into the boot.
6. Stop when the upper edge of the stud is flush with the rubber
7. Repeat until the recommended number of studs are installed in the boot.
Some extra pointers on how to make sure that the studs are securely fastened in the sole:
1. Use a 3 - 4 mm drill to make a hole before installing the studs.
2. Clean the studs with methylated spirits.
3. Fill the holes with Loctite or similar glue
4. Screw the studs in and let the glue dry.
5. Ready to use.
N.B. The drill can also be used to make the holes without needing to use the glue.
Equine Fusion Ultimate Stud Kit